Green Irony

MuleSoft Reviver · The 48-Hour Diagnostic

Know What’s Broken, What It Costs to Fix, and When It’ll Be Right Again.

MuleSoft not performing? In 48 hours, our senior architects deliver a root-cause analysis, a clear remediation plan, and a fixed-price scope — so you stop guessing and start moving.

Book the 48-hour diagnostic
A single diagnostic monitor: a flatlined integration enters the Reviver 48-hour diagnostic, the flatline becomes a live green pulse, and a remediation plan lands — broken build in, remediation plan out.
diagnostic

48 hours

diagnostic

remediation

Fixed-price

remediation

+ plan

Root cause

+ plan

since 2018

Partner

since 2018

When MuleSoft Becomes Someone Else's Problem

You inherited it, acquired it, or watched a prior vendor walk away from it. Now it's yours — and it's not working. Failed flows, missed SLAs, a production environment you're afraid to touch, and a support team that can't tell you why. This is what MuleSoft Reviver is built for.

Recognize Any of These?

  • Timeouts, retries, or stuck queues with no clear root cause.
  • Duplicate or missing data between systems.
  • Logs you can't trust — or no observability at all.
  • One environment works, production keeps breaking.
  • Every change creates a new problem.
  • A prior vendor handed off with no docs, runbook, or path forward.
  • Finger-pointing, and no clear owner.
  • A fix promised in weeks, now months in, still no end date.

If two or more are true, you don't need a health check. You need a diagnostic with a plan attached.

What We Do: The 48-Hour Diagnostic

We tell you what's broken, what it takes to fix it, what it costs, and when it'll be right again.

Your 48-hour readout includes

  • Root-cause analysis with an architecture snapshot.
  • Stabilization options with budget and timeline ranges.
  • Keep-vs-refactor recommendations.
  • A risk register and prioritized backlog.
  • A fixed-price remediation scope — a number and a timeline, not a further discovery engagement.
  • A recorded readout meeting with the full deck.

How the Diagnostic Runs

  1. Day 0

    Triage and access. Read-only credentials, non-prod first, and the clock starts.

  2. Hours 1–24

    Snapshot. We capture the current state of the architecture and its behavior.

  3. Hours 12–36

    Map and measure. We trace the failure patterns to their real root causes.

  4. Hour 48

    Readout. Root-cause analysis, remediation plan, budget, timeline, and a fixed-price scope.

  5. Weeks 1–3 (optional)

    Stabilize. Most reach production-ready in as little as three weeks.

Why This Is Different from a Health Check

A health check tells you what the flags are. The Reviver tells you why they're there, what it'll cost to clear them, and when you'll be done.

The problem usually isn't MuleSoft — it's the build. That's fixable with senior architects who've seen the pattern.

A health check

What the flags are.

The Reviver

Why they're there, what it'll cost to clear them, and when you'll be done — a fixed-price scope, not a further discovery engagement.

Who Runs the Diagnostic

Green Irony has been a MuleSoft partner since 2018 — one of the longest-tenured active in the US. Senior US-based architects run every diagnostic, with no handoff.

We pair those architects with our AI-native delivery engine: faster analysis, complete documentation on delivery, and governed remediation scope.

Proof

Virginia Dare

We've run this for companies across manufacturing, hospitality, and distribution — including Virginia Dare, where we rescued a failed prior-vendor MuleSoft build and delivered a working, event-driven Sage ERP integration after the customer was told it couldn't be stabilized on their timeline.

Read the story →

What Happens After You Book

  1. 1

    We confirm scope and a short engagement letter — the same day in most cases.

  2. 2

    You grant read-only, non-prod access.

  3. 3

    The 48-hour clock starts on access.

  4. 4

    You get the deck and recording within 24 hours of the readout.

  5. 5

    If you move to remediation, the fixed-price scope is ready.

No commitment beyond the diagnostic until you decide there is.

Book the 48-hour diagnostic

Fill out the form and we'll schedule a short intake. Within 48 hours you'll have a root-cause analysis, a prioritized remediation plan, and a fixed-price scope you can act on.

Frequently asked questions

What is the MuleSoft Reviver 48-hour diagnostic?
MuleSoft Reviver is a 48-hour diagnostic for MuleSoft integrations that are broken, stalled, or inherited from a failed build. Senior US-based architects deliver a root-cause analysis with an architecture snapshot, keep-vs-refactor recommendations, a risk register and prioritized backlog, and a fixed-price remediation scope — so you know what's broken, what it takes to fix it, what it costs, and when it'll be right again.
What does the 48-hour diagnostic cost?
The diagnostic is a fixed-scope engagement, and its readout includes a fixed-price remediation scope — a number and a timeline, not a further discovery engagement. There is no commitment beyond the diagnostic until you decide there is.
Can you rescue a failed or stalled MuleSoft implementation?
Yes. That's what MuleSoft Reviver is built for: failed flows, missed SLAs, a production environment you're afraid to touch, and a support team that can't tell you why. In 48 hours you get a root-cause analysis, a prioritized remediation plan, and a fixed-price scope — and most stabilizations reach production-ready in as little as three weeks.
Our MuleSoft integrations broke after go-live — can you help?
Yes. Timeouts, retries, or stuck queues with no clear root cause; duplicate or missing data between systems; one environment working while production keeps breaking — these are exactly the symptoms the diagnostic traces to their real root causes, with a remediation plan and a fixed-price scope attached.
Can you diagnose MuleSoft performance problems?
Yes. Within the first 24 hours we capture the current state of the architecture and its behavior; through hour 36 we map and measure, tracing the failure patterns to their real root causes; and at hour 48 you get the readout — root-cause analysis, remediation plan, budget, timeline, and a fixed-price scope.
Can you take over MuleSoft from another vendor or an offshore team?
Yes. Many Reviver engagements start with a build a prior vendor handed off with no docs, runbook, or path forward. At Virginia Dare, we rescued a failed prior-vendor MuleSoft build and delivered a working, event-driven Sage ERP integration after the customer was told it couldn't be stabilized on their timeline. Senior US-based architects run every diagnostic, with no handoff.
Do we have to rebuild our MuleSoft integration from scratch?
Usually not. The problem usually isn't MuleSoft — it's the build, and that's fixable with senior architects who've seen the pattern. The readout includes keep-vs-refactor recommendations, so you fix what's fixable instead of starting over.
What happens after the 48-hour diagnostic?
You get the deck and recording within 24 hours of the readout. If you move to remediation, the fixed-price scope is ready — and most stabilizations reach production-ready in as little as three weeks. No commitment beyond the diagnostic until you decide there is.

MuleSoft on Life Support? That's the Right Time to Call.

The worst time to run a Reviver diagnostic is six months from now, with another quarter lost and the same questions unanswered. A clear plan beats an open-ended problem.

Book the 48-hour diagnostic